Self Contained Collector Click on the headings below for more detailed pictures.  Engine          John Deere 4045T water cooled turbo diesel engine; 74 HP; 276 CID with wet sleeve liners.  Air Cleaner          Donaldson 8" diameter dry element air cleaner with pre-cleaner.  Radiator          Pressurized, heavy duty trash style.  Radiator Screen  Constructed of ½" expanded flattened steel with steel mesh. Screen is bottom hinged to allow for cleaning without powering down the engine.  Engine Controls        Mounted in clear view and reachable with ease inside a hinged instrument panel. All gauges and engine wiring are connected to a state-of-the-art circuit board for easier and more reliable connections. Gauges include: Tachometer, hour meter, volt meter and oil pressure gauge. All monitoring gauges are illuminated. Automatic safety shutdown for high temperature or low oil pressure.  Engine Enclosure    Engine is covered by a custom sheet metal enclosure constructed of 16-gauge steel. The enclosure has front and rear access doors, which are louvered for proper air circulation. Two doors are provided on top of the enclosure for convenient access to the radiator cap and oil fill cap.  PTO            Heavy duty 13" automotive style PTO and clutch with safety engagement system.  Trailer Chassis    Heavy-duty channel steel, formed and welded. Chassis is constructed of 3" x 8" tubular steel with a ¼" wall thickness.    Chassis Dimensions:         14 C.Y. 119" high x 101" wide x 190" long.         20 C.Y. 119" high x 101" wide x 240" long.         25 C.Y. 119" high x 101" wide x 288" long.         30 C.Y. 119" high x 101" wide x 348" long.  Axles          -14 CY Dual 3.5-inch high speed towing axles rated at 16,000 pounds.   -20 CY Dual 5" high speed towing axles with electric brakes.   -25/30 CY dual 5" axles with electric brakes.  Tires          LT 9.50 x 16.5 tires for 20, 25, 30 CY units. LT 235/85R16 tires for the 14 CY.  Tow Tongue     Heavy duty 6" x 6" x ¼" wall thickness tow bar with pintle eye hitch.  Parking Jack    Heavy duty side wind jack with steel foot.  Trailer Lighting    LED type stop/turn signals as well as clearance lights; rear of unit has 2 oval LED amber strobe lights. Trailer has reflective tape running the length of the unit.  Impeller      32” diameter with 6 gusseted blades constructed of 3/8” thick abrasive resistant T-1 steel with a Brinell hardness exceeding 400. Each blade is gusseted on the back side and welded to a ¼” thick backing plate. Impeller blades are flat with serrated tips for increased wear. Impeller is secured to the shaft via a taper locking bushing. The impeller is completely stress relieved via Bonal stress relief technology to eliminate weld cracking and weld distortion for the highest structural integrity possible. This makes for the strongest and longest lasting impeller on the market.  Impeller Shaft    2.25" diameter.  Blower Housing     17-degree exhaust. Outer housing is constructed of 10 gauge welded steel, front and back plates are 7-gauge steel. Inspection/clean out door is located on face to facilitate convenient inspection of internal contents or condition. A safety kill switch is located on the door to shut down the engine when the door is opened.  Liners        Slip-in style which requires no bolts. Made of ¼" abrasive resistant steel.  Suction Inlet      Located on curbside of unit using barrel style inlet, which allows the hose to swivel left or right with ease and allows the hose to be locked in the traveling position without opening the housing.  Intake Hose       16" diameter x 120" long. Heavy duty wire reinforced 3/8" thick flexible rubber hose.  Hose Boom       Boom is constructed of welded rectangular tubing and swivels on two 1.5" diameter bearings. The boom is hydraulically controlled with an electric operated hydraulic pump. Hydraulic cylinder is 1.5" diameter, 12" minimum stroke.  Boom Controls       Push button style switch located on the intake nozzle.  Hoist Hydraulics       Gear driven hydraulic pump connected directly to the engine. Control valve for hoist is located in the front of the unit for easy access.  Dumping Hoist       Uses a Crysteel scissor style hoist capable of dumping 30,400 pounds for the 14CY, 43,000 pounds for the 20 CY and 53,200 pounds for the 25 and 30 CY units.  Box Container       self-dumping container constructed of 12-gauge steel with vented top and side hinge rear doors that lock in the open position for dumping. Available in 14, 20, 25 and 30 cubic yard capacities.  Vented Top Screens       Easily removable ½" expanded steel mesh screens are located on the top of the box container. Two screens for the 14 & 20 CY units and three screens for the 25 & 30 CY units.  Fuel Tank        44 gallon capacity fuel tank manufactured of ¼" thick roto-molded polyethylene.  Empty Weight       14 CY-8,200 pounds; 20CY-10,600 pounds; 25 CY-11,300 pounds, 30CY-12,300 pounds.  Paint      All metal parts are thoroughly cleaned, primed, painted and dried before assembly. Each part is primed with a rust inhibitor primer and is painted with two coats of automotive quality paint. The parts are then assembled on the unit so that bolts, nuts, cables and grease fittings are not painted. Specifications subject to change without notice.   © 2012 ODB Company, Inc, all rights reserved.