Where is my serial number plate?
How to test the Murphy (Shutdown) Switch / Test the Limit Switch (2016 and before)
The Murphy (shutdown) switch, shuts down the engine when certain triggers are tripped. The triggers that will shutdown the engine are:
- Blower housing inspection door has been opened
- High engine coolant temperature
- low engine oil pressure
Click here for troubleshooting procedures.
How to Install and Remove an Impeller
The impeller is at the heart of the debris collector. Please take a look at the steps required to install or remove an impeller. Click here for instructions.
How to adjust the Auto Mfg. PTO
As the clutch is use the clutch disc may wear a little and it will need to be adjusted. Click here for instructions.
How to install the new Auto Mfg. PTO
Did you just purchase a new Auto PTO and would like to see how to install it. Click here for instructions.
How to troubleshoot the single axis hose boom
The single axis hose boom operates using an electric over hydraulic pump, powering a boom cylinder. Click here for a troubleshooting guide.
How to replace a blower housing liner set
Periodically replacing your blower housing liner set can add years and years to the life of your blower housing. Click here for instructions on how to do it.